N E W S Q U A R E (SP) P O I N T- O F - U S E S E R I E S WATER COOLER
Integral Recess for filters
Stylish granite finish
No drain required
Unique Float Valve Assembly
Contemporary design to suit any workplace
World class reliability and performance
Cup dispenser bracket and cover included
PROUDLY AUSTRALIAN MADE
COLD WATER RESERVOIR
All products have a highly polished, stainless steel tank which holds
1.8 litres of chilled water during normal usage. Each cooler has a
chilling capacity of 5 litres per hour during normal peak periods.
HOT WATER RESERVOIR
The stainless steel hot water tank is fitted with a high performance
575-watt band heater. This model delivers 50 cups (150ml) of hot
water per hour at approximately 90ºC. Hot tanks have drains fitted
for easy cleaning and sanitization. It is very easy to remove for service
if required. Each tank has its components swaged together. As no
fusion welding is used, the occurance of pitting, crevice or galvanic
corrosion is prevented.
TEMPERATURE CONTROL
A factory pre-set thermostat controls the temperature of water in the
cold tank. The water temperature in the hot tank is controlled by a
mechanical thermostat set to approximately 95ºC.
COMPRESSOR
1/16 h.p. capacity 49 watts. The compressor is hermetically sealed for
silent running.
CONDENSER
The static condensor is fabricated from steel tube and wire.
FILTER OPTION
All filtered units house a high quality 5 Micron snap seal filtration
system.
ELECTRICAL
240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied.
PERFORMANCE
Water Inlet – 26.7ºC
Water Outlet – 10ºC
Ambient Air – 32.2ºC.
WEIGHT - PACKED
SP2G - 16 kgs
SP2GF - 17 kgs
SP3G - 18 kgs
SP3GF - 19 kgs
DIMENSIONS PACKED
Width – 320mm Container Capacity
Depth – 320mm 20ft – 216 units
Height – 940mm 40ft – 430 units
WARRANTY
Twelve months comprehensive coverage.
Five years for compressor replacement
