N E W S Q U A R E (SP) P O I N T- O F – U S E S E R I E S WATER COOLER

Integral Recess for filters

Stylish granite finish

No drain required

Unique Float Valve Assembly

Contemporary design to suit any workplace

World class reliability and performance

Cup dispenser bracket and cover included

PROUDLY AUSTRALIAN MADE

COLD WATER RESERVOIR

All products have a highly polished, stainless steel tank which holds

1.8 litres of chilled water during normal usage. Each cooler has a

chilling capacity of 5 litres per hour during normal peak periods.

HOT WATER RESERVOIR

The stainless steel hot water tank is fitted with a high performance

575-watt band heater. This model delivers 50 cups (150ml) of hot

water per hour at approximately 90C. Hot tanks have drains fitted

for easy cleaning and sanitization. It is very easy to remove for service

if required. Each tank has its components swaged together. As no

fusion welding is used, the occurance of pitting, crevice or galvanic

corrosion is prevented.

TEMPERATURE CONTROL

A factory pre-set thermostat controls the temperature of water in the

cold tank. The water temperature in the hot tank is controlled by a

mechanical thermostat set to approximately 95C.

COMPRESSOR

1/16 h.p. capacity 49 watts. The compressor is hermetically sealed for

silent running.

CONDENSER

The static condensor is fabricated from steel tube and wire.

FILTER OPTION

All filtered units house a high quality 5 Micron snap seal filtration

system.

ELECTRICAL

240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied.

PERFORMANCE

Water Inlet26.7C

Water Outlet10C

Ambient Air32.2C.

WEIGHT – PACKED

SP2G – 16 kgs

SP2GF – 17 kgs

SP3G – 18 kgs

SP3GF – 19 kgs

DIMENSIONS PACKED

Width320mm Container Capacity

Depth320mm 20ft216 units

Height940mm 40ft430 units

WARRANTY

Twelve months comprehensive coverage.

Five years for compressor replacement

MAINS CONNECTED