< Back to Industrial Water Coolers

HEAVEY DUTY BUBBLER & OPTIONAL GLASS FILLER

HEAVEY DUTY BUBBLER & OPTIONAL GLASS FILLER

(Rent) (Buy)

Price From 1'556.00 inc GST

For more information and specifications click here

MODEL A-M11

Polished stainless steel top. Steel cabinet with durable epoxy finish. (available also in satin finish).
Front panel removes easily for service and cleaning.

Now fitted with an industrial grade 304 stainless steel tank. Robust construction to ensure longevity

Polished stainless steel top. Front panel removes for ease of servicing. Optional stainless steel cabinets

Simple filter changes for filtered units. Adjustable, tamper proof non-squirt bubbler and glass filler.

PROUDLY AUSTRALIAN MADE

The M Series, one of the most popular mains connected water cooler is a hardwearing, sturdy unit with a variety of applications. These units can be found in schools, construction sites, hospitals, factories and many other environments where a drinking water outlet is required. Available in low (10 Litres per hr), medium (19 Litres Per Hr) and heavy-duty (26 litres per hr) capacities, these water coolers are available with a choice of drinking outlets; units with only a drinking bubbler and units with both a bubbler and glass filler. Additional options such as filters and stainless steel cabinets are also available

M Series Performance&Options

Cabinet

Filtered

10 Litres Per Hour

19 Litres Per Hour

26 Litres Per Hour

0-15 People*

15-40 People*

40-80 People*

Bubbler

Bubbler&Glass Filler

Bubbler

Bubbler&Glass Filler

Bubbler

Bubbler&Glass Filler

Colour-Bond

No

M2

M3

M4

M5

M10

M11

Yes

M2F

M3F

M4F

M5F

M10F

M11F

Stainless Steel

No

N/A

N/A

M4SS

M5SS

M10SS

M11SS

Yes

N/A

N/A

M4FSS

M5FSS

M10FSS

M11FSS

| *Approximate figures only

Price for each specific unit and optional glass filler is available upon request

WATER RESERVOIR

All have a 1.5 litre stainless steel tank within the chilling chamber to

meet peak usage periods. This tank is fabricated from industrial grade 304 stainless steel for your piece of mind.

REFRIGERATION

All refrigerant gases are non-toxic, non-flammable and environmentally

sympathetic. The refrigerant flow is controlled by a capillary tube,

which has no moving parts? To give maximum heat exchange a suction line is fitted.

M2/M3Uses 250 Gms of R134A refrigerant. M4/M5Uses 190 Gms of R134A refrigerant

M10/M11Uses 127 Gms of R22 refrigerant

WATER FLOW CONTROLS

The bubbler is rated to supply 1.7 litres per minute at mains water

pressure of between 140 and 700kPa. An automatic, self-regulating

control is fitted to overcome varying mains pressure.

WATER CONNECTIONS:

THERMOSTAT CONTROL:

Water inletWater outlet40mm Female F.P.V.C. pipe 1/2male B.S.P. The thermostat is factory pre-set.

COMPRESSORS:

2/M3 – M4/M5M10/M111/8 h.p. capacity 138 watts1/5 h.p. capacity 230 watts1/4 h.p. capacity 430 watts

CONDENSER

Copper tube and expanded aluminium fin.

ELECTRICAL

240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied.

PERFORMANCE TO ARI 1010-94 STANDARD

Water Inlet26.7C Water Outlet10C Ambient Air32.2C.

WEIGHT – PACKED

M2/M3 – 26kgs M4/M5 – 28kgs M10/M11 – 30kgs

DIMENSIONS

Width350mm Container Capacity. Depth350mm 20ft192 units. Height1100mm 40ft396 units

Most of our equipment is available for Rent.
Rentals are available in all of the following regions: Victoria, Tasmania, NSW, ACT, Qld, SA, WA&NT.

For more detailed information on renting, go to rentals

To request further information or to receive a free trial, simply send your request to Royal Springs, and we will respond promptly.
Your Name :
Company :
Address :
City :
State :
Postcode :
Your E-Mail : Mandatory
Office Phone : Mandatory
Home Phone :
Mobile Phone :
Fax :
Preferred Communication Method:
Comments [ enter below and click send ]

< Back to Industrial Water Coolers